PEL Sunreflect solar powered outdoor lighting.

How can you provide public lighting without energy costs, installation difficulties, bulb changing, maintenance – besides all this in an environment-friendly way?

With our solar-powered luminaires we offer a long-term solution.

Install easy and fast, avoid electricity network developments, wireing, road works, ditching, etc.

What does the most modern and economical LED light source can provide you?

  • 117 lumen / Watt light flux
  • Lifetime is more than 40000 hours
  • Natural white light
  • 4000 hours energy cost-free lighting time per year.

PEL 12/24 – Sunreflect technical details

Column height 4/5/6/8 m
Height of the light source recommended highness of the lighting point: 3,8 /4,8 /5,8 /6,8 m
Battery cyclic lead-acid battery
Battery lifetime minimum: 4 years
Solar cell output 45/55/65/85 W +/- 3% (25 years)
MPPT charge control To maximize the extracted solar energy
Lighting during the night Due to the brightness reduction and/or battery-level monitoring – Up to 6 nights of lighting time can be provided additionally.
Warranty 1 year (including battery)
Protection IP65
Certificate of Conformity CE

PEL EE Sunreflect product family for public lighting

Public Lighting – On territories, where electricity network unavailable, nor an option for installation.

A concept for lighting solution by using an LED light source and all the operation time is controlled by our own developed software. The result is an energy-saving, cost-effective light source for environmentally conscious operators.

AC power-supply NOT needed (100% self-powered), thus solar system work reliably even in low light (winter) periods.

The products are made with statically designed columns, LED lamp heads fixtures which operate on 3 different power levels:

Output:

12 W

24 W

36 W

Light Flux:

1 670 lumen

3 340 lumen

5 000 lumen

Column height: 4 m; 5 m; 6 m; 8 m and 12 m, optional.

Our solar-powered public lighting systems meet the required level of illumination, meet the strictest standards, use absolutely environmentally friendly technology, do not harm the environment at all.

Features: long life, reliability, safety operation, simplicity, easy to install.

No repair, replacement or maintenance required.

The installation of solar lamps (luminaries) requires only the preparation of a concrete base (into an approximately 50 x 50 x 90 cm sized pit) – which can be relocated at any time. Daily operational cost is about ~ EUR 0,008 which comes by the amortization of the battery. The battery shall be replaced every 5 years.

Fields of application: Recommended for lighting roads (according to MSZ EN 13201 standard S5, S6, S7), roads with low traffic, promenades, walking paths, gardens, parks, playgrounds, public areas, outdoor sports facilities, industrial areas, agricultural areas, parking lots.

4 m column (with 12W LED source)

Details of the luminaire:

  • 4 m high sintered column (3 mm thick, S235 JR rolled steel)
  • Surface: galvanized (or high quality powder coated to the requested color – sintered)
  • 12 W LED lamphead   

The luminaire is delivered complete, ready for use; the package contains the following items:

  • column with lampholders (4 m high, light source on 3.80 m high);
  • statically sized tool for concrete base;
  • LED lamphead (IP65 protected);
  • solar cell (polycrystalline);
  • solar cell holder arm;
  • charging, regulating, protective electronics (programmable);
  • battery designed for solar technology;
  • documentation, technical description, warranty.

You can choose from the following designs:

5 m column (12W LED light source)

Details of the luminaire:

5 m high sintered column, octagonal (3 mm thick, S235 JR rolled steel)

  • Surface: galvanized (or high quality powder coated to the requested color – sintered

12 W LED light source

The luminaire shipped ready to use; the package contains the following items:

  • column with lamp holder arms (5 m high, light source on 4.80 m high);
  • statically sized tool for concrete base;
  • LED lamphead (IP65 protected);
  • solar cell (polycrystalline);
  • solar cell holder arm;
  • charging, regulating, protective electronics (programmable);
  • battery designed for solar technology;
  • documentation, technical description, warranty.

6 m column (12W LED light source)

Details of the luminaire:

6 m high sintered column, octagonal (3 mm thick, S235 JR rolled steel)

  • Surface: galvanized (or high quality powder coated to the requested color – sintered

12 W LED light source

The luminaire shipped ready to use; the package contains the following items:

  • column with lamp holder arms (6 m high, light source on 5.80 m high);
  • statically sized tool for concrete base;
  • LED lamphead (IP65 protected);
  • solar cell (polycrystalline);
  • solar cell holder arm;
  • charging, regulating, protective electronics (programmable);
  • battery designed for solar technology;
  • documentation, technical description, warranty.

6 m column (24W LED light source)

Details of the luminaire:

6 m high sintered column, octagonal (3 mm thick, S235 JR rolled steel)

  • Surface: galvanized (or high quality powder coated to the requested color – sintered

24 W LED light source

The luminaire shipped ready to use; the package contains the following items:

  • column with lamp holder arms (6 m high, light source on 5.80 m high);
  • statically sized tool for concrete base;
  • LED lamphead (IP65 protected);
  • solar cell (polycrystalline);
  • solar cell holder arm;
  • charging, regulating, protective electronics (programmable);
  • battery designed for solar technology;
  • documentation, technical description, warranty.

6 m column (2 x 12W LED light source)

Details of the luminaire:

6 m high sintered column with 2 lamp holder arms, octagonal (3 mm thick, S235 JR rolled steel)

  • Surface: galvanized (or high quality powder coated to the requested color – sintered

2 x 12 W LED light source

The luminaire shipped ready to use; the package contains the following items:

  • column with lamp holder arms (5 m high, light source on 4.80 m high);
  • statically sized tool for concrete base;
  • LED lamphead (IP65 protected);
  • solar cell (polycrystalline);
  • solar cell holder arm;
  • charging, regulating, protective electronics (programmable);
  • battery designed for solar technology;
  • documentation, technical description, warranty.

Delivery time: 4-8 weeks (depending on quantity and distance)

Parity: ExW

Payment conditions: 50% advance payment at purchase order, 50% right before delivery.

Installation: Possible after professional training

Warranty: Battery: 1 year; Inside electronics: 3 years; LED Lamps: 5 years; Solar panel: 10 years.

Spare parts supply: At least for 10 years. A minimum stock of spare parts must be stored by the distributor (quantity and type of spare parts depending on the distributor’s sales forecast).

Service: 72 hours reaction time recommended, but mainly depending on SLA between the seller and distributor.